2. Ensure that the machine is as level as possible.
The machine can be temporarily operated on a slope of not more than 15°.
3. Ensure accessibility so that all work on the machine can be carried out without danger or hin‐
drance.
4.
NOTICE!
Fire hazard from build-up of heat and hot exhaust system!
Insufficient distance from a wall may well cause heat build-up that could damage the machine.
➤ Do not position the machine directly against a wall.
➤ Ensure always sufficient ventilation space around the machine.
5. Position the machine as far as possible from any wall.
6. Ensure there is enough free space all round and above the machine.
7. Keep air inlet and outlet openings free of obstructions so that the cooling air can flow freely
through the machine.
8. Place the machine in such a manner that
■ wind does not blow into the cooling air outlet.
■ exhaust gases and heated cooling air can not be drawn into the compressor.
9.
NOTICE!
Ambient temperature too low!
Frozen condensate and highly viscous engine or compressor cooling oil can cause damage
when starting the machine.
➤ Use winter grade engine oil.
➤ Use low viscosity compressor cooling oil.
➤ Allow the machine to warm up in IDLE (low speed), see chapter 8.2.3.
10. At ambient temperatures below 0 °C, follow instructions in chapter 7.4.
5
Installation and Operating Conditions
5.2
Installation conditions
No.: 9_6974 20 E
Service manual Portable compressor
M122
47
RAMIRENT
