KAESER CSD 102, Service Manual

Page: 23 / 134

Safety and Responsibility
3 --- 15
Spring forces
Springs under tension or compression represent contained energy. Uncontrolled release of
this energy can cause serious injury or death.
Minimum pressure/check valves, pressure relief valves and inlet valves are powerfully
spring ---loaded.
Do not open or dismantle valves.
Rotating components
Touching the fan wheel, the coupling or the belt drive while the machine is switched on can
result in serious injury.
Do not open the enclosure while the machine is switched on.
Isolate all phases of the main power supply.
Check that there is no voltage present.
Wear close---fitting clothes and a hair net if necessary.
Make sure all covers and safety guards are in place and secured before switching on.
Temperature
Avoid contact with hot components.
These include, for example, compressor airends or blocks, oil and compressed air
lines, coolers, oil separator tanks, motors and machine heaters.
Wear protective clothing.
When welding is taking place on or near the machine take adequate measures to en-
sure that no parts of the machine or any oil vapours can ignite because of sparks or
heat.
Noise
Operate the machine only with soundproofing in place.
Wear hearing protection if necessary.
The pressure relief valve blowing off can be particularly loud.
Operating materials
Strictly forbid fire, open flame and smoking.
Follow safety regulations when dealing with lubricants and chemical substances.
Avoid contact with skin and eyes.
Do not inhale oil mist or vapour.
Do not eat or drink while handling cooling and lubricating fluids.
Keep suitable fire extinguishing material on hand.
Use only KAESER approved operating materials.
Unsuitable spare parts
Use only spare parts approved by the manufacturer for use in this machine. Unsuit-
able spare parts compromise the safety of the machine.
Use only genuine KAESER parts for pressure components.
Conversion or modification of the machine
Do not permit conversion or modification of the machine as this can compromise func-
tion and safe working.