Juniper QFX3500 Hardware Documentation Download Page 82

Page: 82 / 669

CHAPTER 6

EX4300 Overview

IN THIS CHAPTER

EX4300 Switches Hardware Overview | 58

EX4300 Switches Hardware Overview

IN THIS SECTION

Benefits of the EX4300 Switch | 59

Software | 59

EX4300 Switches First View | 59

Uplink Modules | 75

Virtual Chassis | 78

Power Supplies | 79

Fan Modules | 80

EX4300 Switch Components | 81

Juniper Networks EX4300 Ethernet Switches provide connectivity for high-density environments and

scalability for growing networks. These switches can be deployed wherever you need high density of

Gigabit Ethernet ports or redundancy. Typically, EX4300 switches are used in large branch offices, campus

wiring closets, and data centers. In data centers, EX4300 switches can be positioned as top-of-rack switches;

the top devices in a rack to provide connectivity for all the devices in the rack and provide options for

optimized airflow (hot aisle/cold aisle).

Three variants of the EX4300 switches are available—24-port, 32-port, and 48-port switches, with or

without PoE+, with AC or DC power supplies, and with different airflow directions. EX4300 switches also

provide uplink ports and a slot for installing an optional uplink module.

Summary of Contents for QFX3500






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QFX3500

Reviews:

Related manuals for QFX3500

Brands by name

Popular brands

Juniper QFX3500, Hardware Documentation

Search results

Summary of Contents for QFX3500

Reviews:

Related manuals for QFX3500

Brands by name

Popular brands