Juniper QFX3500 Hardware Documentation Download Page 568

Page: 568 / 669

Table 106: Health Status (continued)

Description

Field

Indicates the memory used in the Routing Engine. In a Virtual Chassis configuration, the

memory utilization value of the primary Routing Engine is displayed.

NOTE:

In EX4300 and EX4600 Virtual Chassis, to display the Routing Engine memory

utilization of the primary or backup, click the respective image. J-Web is supported on

EX4600 switches only in J-Web Application package Release 14.1X53-A2.

Memory util.

Indicates the usage and capacity of internal flash memory and any external USB flash drive.

NOTE:

In EX4300 Virtual Chassis, the flash memory utilization of the primary switch is

displayed by default. To display the flash memory utilization along with the internal and

external flash memory utilization details for each switch or line card, mouse over individual

switch or line card images.

In EX4600 Virtual Chassis, to display the flash memory utilization along with the internal

and external flash memory utilization details of each switch or line card mouse over the

green-colored indicator.

Flash

Indicates the chassis temperature status. Temperatures are listed in Celsius and the

corresponding Fahrenheit values.

NOTE:

The Temp field is unavailable for a standalone EX2200-C switch.

The Temp field is dynamically available for an EX2200 Virtual Chassis switch based on the

model of the member clicked.

NOTE:

In EX4300 Virtual Chassis, the temperature of the primary Routing Engine is displayed

by default. To display the temperature of the Routing Engine of any switch, click the image

of that switch.

In EX4600 Virtual Chassis, to display the temperature of the Routing Engine of each switch,

mouse over the green-colored indicator.

Temp.

Indicates the average CPU usage over 15 minutes. In a Virtual Chassis configuration, on

loading the primary or backup switch, the CPU load for that switch's Routing Engine is

displayed by default. To display the CPU load for a specific switch's Routing Engine, click

the image of that switch.

CPU load

544

Summary of Contents for QFX3500






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QFX3500

Reviews:

Related manuals for QFX3500

Brands by name

Popular brands

Juniper QFX3500, Hardware Documentation

Search results

Summary of Contents for QFX3500

Reviews:

Related manuals for QFX3500

Brands by name

Popular brands