Juniper QFX3500 Hardware Documentation Download Page 482

Page: 482 / 669

Ensure that you have the following parts and tools available to install a fan tray in a QFX3500 device:

•

ESD grounding strap

To install a fan tray in a QFX3500 device (see

Figure 162 on page 458

1. Attach the ESD grounding strap to your bare wrist, and connect the strap to the ESD point on the

chassis.

2. Taking care not to touch the connectors, remove the fan tray from its bag.

3. Using both hands, align the tray with the fan tray slot on the front panel of the chassis and slide it in

until it is fully seated and the locking lever slides into place.

CAUTION:

Damage can occur if you attempt to install a fan tray into a chassis with

a different airflow direction. Check the device model to ensure that you are installing

a fan tray with the same airflow direction as the chassis. The fan trays are designed

so that they can only be inserted into the QFX3500 device model that supports

the same airflow type. See Cooling System and Airflow for a QFX3500 Device for

more information.

Figure 162: Installing a Fan Tray in a QFX3500 Device

g050014

Summary of Contents for QFX3500






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QFX3500

Reviews:

Related manuals for QFX3500

Brands by name

Popular brands

Juniper QFX3500, Hardware Documentation

Search results

Summary of Contents for QFX3500

Reviews:

Related manuals for QFX3500

Brands by name

Popular brands