Juniper QFX3500 Hardware Documentation Download Page 465

Page: 465 / 669

To install a fan module in a QFX5100 device (see

Figure 152 on page 441

and

Figure 153 on page 441

1. Attach the ESD grounding strap to your bare wrist, and connect the strap to the ESD point on the

chassis.

2. Taking care not to touch the connectors, remove the fan module from its bag.

3. Align the module with the open slot on the management panel of the chassis and slide it in until it is

fully seated.

CAUTION:

Damage can occur if you attempt to install a fan module into a chassis

with a different airflow direction. Compare the switch product SKU with the airflow

marking on the handle to ensure that you are installing a fan module with the same

airflow direction as the chassis. The fan modules are designed so that they can only

be inserted into the QFX5100 product SKU that supports the same airflow type.

See Cooling System and Airflow in a QFX5100 Device for more information.

4. Using a Phillips screwdriver, turn the locking screw until it is tight.

Figure 152: Installing a Fan Module in a 1 U QFX5100 Device

QFX5100-48S
RUNNING

JUN OS

Figure 153: Installing a Fan Module in a 2 U QFX5100-96S Device

Summary of Contents for QFX3500






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QFX3500

Reviews:

Related manuals for QFX3500

Brands by name

Popular brands

Juniper QFX3500, Hardware Documentation

Search results

Summary of Contents for QFX3500

Reviews:

Related manuals for QFX3500

Brands by name

Popular brands