Juniper QFX3500, Hardware Documentation

Page: 381 / 669

NOTE: One person must be available to lift the switch while another secures the switch to the
rack.
CAUTION: If you are mounting multiple switches on a rack, mount a switch in the
bottom of the rack first and proceed to mount the rest of the switches from bottom
to top.
To mount the switch on two posts of a rack:
1. Place the switch on a flat, stable surface.
2. Align the mounting brackets along the front, rear, or center of the side panels of the switch chassis
depending on how you want to mount the switch. For example, if you want to front-mount EX4300
switches except EX4300-48MP and EX4300-48MP-S switches, align the brackets along the front of
the side panel (see Figure 119 on page 357 ). If you want to front-mount an EX4300-48MP or
EX4300-48MP-S switch, align the brackets 17.5 mm offset from the front panel (see
Figure 120 on page 357 and Figure 121 on page 358 ).
Figure 119: Attaching the Mounting Bracket to the Side Panel of EX4300 Switches Except EX4300-48MP
and EX4300-48MP-S Switches
g021433
Figure 120: Attaching the Mounting Bracket to the Side Panel of EX4300-48MP and EX4300-48MP-S
Switches
g022543
357