Juniper PTX5000, Hardware Manual

Page: 706 / 721

domestic environment, it might cause radio interference. Install and use the equipment according to the
instruction manual. VCCI-A.
United States
The hardware equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, might cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Compliance Statements for Environmental Requirements
Batteries in this product are not based on mercury, lead, or cadmium substances. The batteries used in
this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC, and 98/101/EEC. The
product documentation includes instructional information about the proper method of reclamation and
recycling.
PTX5000 Compliance Statements for NEBS
• The equipment is suitable for installation as part of the Common Bonding Network (CBN).
• The equipment is suitable for installation in locations where the National Electrical Code (NEC)
applies.
• The battery return connection is to be treated as an isolated DC return (DC-I), as defined in
GR-1089-CORE.
• You must provision a readily accessible device outside of the equipment to disconnect power. The
device must also be rated based on local electrical code practice.
• During power supply and air filter maintenance, the cover is intended to be removed from the
chassis.
SEE ALSO
PTX5000 Agency Approvals | 685
688