Table 16: AC Power Cord Specifications for the ACX500 Indoor Router
(Continued)
Country
Model Number
Electrical Specification
Plug Type
Design Standard
Switzerland
CBL-PWR-C15M-
HITEMP-SZ
250 VAC, 10 A, 50 Hz
12G
SEV 1011 / 6534-2
North America
CBL-PWR-C15M-
HITEMP-US
125 VAC, 13 A, 60 Hz
498G
NEMA 5-15
United Kingdom
CBL-PWR-C15M-
HITEMP-UK
250 VAC, 10 A, 50 Hz
BS89/13
BS 1363/A
WARNING: The AC power cord for the router is intended for use with the router only
and not for any other use.
WARNING: The attached power cable is only for this product. Do not use the cable for
another product. Translation in Japanese follows:
NOTE: In North America, AC power cords must not exceed approximately 14.75 ft (4.5 m) in
length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and
210-52, and Canadian Electrical Code (CEC) Section 4-010(3). You can order AC power cords
that are in compliance.
CAUTION: Power cords and cables must not block access to device components or
drape where people could trip on them.
72
