As shown in
Figure 10
from left to right, the first three cable connector inlets are for the three
Gigabit Ethernet ports supporting SFP transceivers. The fourth inlet is for the cables for the three
Gigabit Ethernet RJ-45 ports.
2.
Remove the weather seal cap from the cable inlet port on the router by using a slotted screwdriver.
See
Figure 17
. Keep the weather seal cap in a safe place for future use.
Weather seal caps prevent dust and water from entering the router when the router or the
interface port is not in use.
Figure 49: Removing the ACX500 Outdoor Router Weather Seal Cap
WARNING: Ensure that you have the weather seal caps on the cable inlet ports
that are not in use. Failing to do so might allow water and dust to enter the router
resulting in router failure.
3.
Unscrew and remove the corresponding cable connector unit from the cable inlet port. see
Figure
18
.
151
