– 52 –
4) Change data of selected editing point.
Press DATA CHANGE key
❼
and data of editing point can be changed.
Pattern No. which has been registered is displayed and it is possible to select.
In addition, press RESET key
❸
, and the pattern data of editing point can be deleted.
When RESET key
❸
is held pressed for one second, all the registered pattern data can be deleted.
Repeat steps
3)
and
4)
to perform editing data.
5) Cancelling insertion of the pattern data.
When RESET key
❸
is pressed while the addition command pictograph is displayed, insertion of
the pattern data can be cancelled.
In addition, when READY key
❷
is pressed, insertion of the pattern data is cancelled and the
mode changes over to the sewing mode.
When RETURN key
❾
is pressed, insertion of the pattern data is cancelled and the mode chang-
es over to the input mode.
6) Creating new cycle data
Press COPY key
, under the input mode, to call the copy screen. Then, press ITEM SELECT
key
❻
to select the new-creation pictograph. This enables the creation of new cycle data.
When you press DATA CHANGE key
❼
while the new-creation pictograph is being selected, the
pattern number to be newly created can be selected.
Then, select the pattern number to be newly created and press READY key
❷
to create new
cycle data.
1) Putting the data name in the edit state.
Refer to
"V-17. Performing continuous stitching" p.47
"V-18. Performing cycle stitching"
.
2) Changing the name of data.
Refer to
"V-11. Changing sewing data" p.34
19. How to change the name of cycle/continuous sewing data
