– 38 –
No.
Item
Setting range
Edit unit
Remarks
S010
Compensation of bar-tacking width, right
This item adjusts right side outer shape of bar-tack-
ing section in terms of overedging section. It is cor-
rected 1st and 2nd bar-tacking together.
-1.00 to 1.00
0.05 mm
–
Bottom of
straight
bar-tacking
Top of
square
type
Bottom
of square
type
S011
Compensation of bar-tacking width, left
This item adjusts left side outer shape of bar-tacking
section in terms of overedging section.
-1.00 to 1.00
0.05 mm
–
Bottom of
straight
bar-tacking
Top of
square
type
Bottom
of square
type
S012
Taper bar-tacking offset, left
This item sets length to form bar-tacking section of
taper bar-tacking shape.
0.00 to 3.00
0.05 mm
*1
S013
Taper bar-tacking offset, right
This item sets length to form bar-tacking section of
taper bar-tacking shape.
0.00 to 3.00
0.05 mm
*1
S014
Eyelet shape length
This item sets upper side length from center of eye-
let of eyelet shape.
1.0 to 10.0
0.1 mm
*1
S015
Number of stitches of eyelet shape
This item sets number of stitches in the upper 90˚ of
eyelet shape.
1 to 8
1
*1
S016
Eyelet width
This item sets crossuise size of the inside of eyelet
shape. Actual needle entry point is the dimension to
which
S004 Knife groove width, left
is added.
1.0 to 10.0
0.1 mm
*1
S017
Eyelet length
This item sets lengthwise size of the inside of eyelet
shape.
1.0 to 10.0
0.1 mm
*1
S018
Round type shape length
This item sets upper length from the center of round
type shape.
1.0 to 5.0
0.1 mm
*1
Top of
semilunar
type
Bottom of
semilunar
type
Top of
round
type
Bottom
of round
type
Top of
Radial
type
Bottom
of radial
type
S019
Number of stitches of radial shape
This item sets number of stitches in the upper 90˚ of
radial shape.
1 to 8
1
*1
S020
Reinforcement of radial shape
This item sets with/without reinforcement stitching of radial
shape.
: With
: Without
–
–
*1, *2
*1 : Displayed according to the shape
*2 : Displayed when it is set to with edit. Refer to
"V-12. Method of setting sewing data with/without edit" p.36
*3 : Displayed when the function is selected.
