– 31 –
(1) Setting procedure of the counter value
1) Call counter setting screen.
When COUNTER key
is pressed
under the input mode where SET READY LED
goes out, the counter screen
A
is displayed to
enable setting of the counter.
Setting of the counter value can be performed
only with the input mode.
In case of the sewing mode, press READY key
❷
to set the mode to the input mode.
2) Selection of kinds of counters.
Press ITEM SELECT key
❻
to display the
pictograph
B
which indicates the counter type in
reverse video.
Press DATA CHANGE key
❼
, and select
the counter you desire from among the kinds of
counters below.
3) Change of counter set value.
Press ITEM SELECT key
❻
to display the set value
C
of the counter in reverse video.
Press DATA CHANGE key
❼
and input the set value until count-up is reached.
4) Change of existing counter value.
Press ITEM SELECT key
❻
to display the current value
D
of the counter in reverse video.
Press RESET key
❸
and the value on the way of counting can be cleared.
In addition, it is possible to edit the numerical value with DATA CHANGE key
❼
.
9. Using the counter
The counter has been factory-set to "
①
Sewing UP counter" at the time of delivery. This counter has
been factory-set so that it stops counting after the number of times of start of sewing machine has
reached 100. Set this counter according to your conditions of use.
A
B
D C
❷
❸
❼
❻
