– 34 –
(2) Changing procedure of sewing data
1) Set the mode to the input mode.
Under the input mode where SET READY LED
goes out, sewing-data change is enabled.
If the current mode is the sewing mode, press
READY key
❷
to change over the mode
to the input mode.
2) Call sewing data edit screen.
When EDIT key
❽
is pressed, the sewing
data edit screen
A
for the currently-selected pat-
tern No. is displayed.
3) Select sewing data to be changed.
Press ITEM SELECT key
❻
, and select the
data item you desire to change.
Data item which is not used according to the
shape and data item which is set without function
are skipped and not displayed. So, be careful.
→
Refer to
"V-12. Method of setting sewing
4) Change data.
For the sewing data, there are data item which changes numerical value and that which selects pictograph.
No. such as
is attached to the data item which changes numerical value. Increase or decrease the
set value with DATA CHANGE key
❼
to change the value.
No. such as
is attached to the data item which selects pictograph. Pictograph can be selected with
DATA CHANGE key
❼
.
→
For the details of sewing data, refer to
.
Pictograph showing data item
11. Changing sewing data
(1) Initial sewing data at the time of your purchase
Patterns from 1 to 10 have been already registered at the time of your purchase. Initial values of the
square type, the cloth cutting length of which only is different from each other, have been inputted in the
sewing data.
→
"XI. INITIAL VALUE DATA FOR EACH SHAPE TABLE" p.85
Pattern No.
Cloth cutting length
1
6.4 mm
(1/4”)
2
9.5 mm
(3/8”)
3
11.1 mm
(7/16”)
4
12.7 mm
(1/2”)
5
14.3 mm
(9/16”)
6
15.9 mm
(5/8”)
7
17.5 mm
(11/16”)
8
19.1 mm
(3/4”)
9
22.2 mm
(7/8”)
10
25.4 mm
(1”)
Data item No.
❽
A
❼
❻
❷
