JUKI LBH-1790AN, Instruction Manual

Page: 24 / 88

– 21 –
No. NAME FUNCTION No. NAME FUNCTION
❶
LCD display Various data such as pattern
No., shape, etc. are displayed.
OVEREDGING
WIDTH key
This key selects overedging width
display.
Every time this key is pressed,
S005 and S006 are displayed alter-
nately.
❷
READY key Press this key when starting
sewing.
Every time this key is pressed,
change-over of sewing ready
set state and data set state can
be performed.
PITCH key This key selects pitch of parallel
section.
Every time this key is pressed,
S007 and S021 are displayed alter-
nately.
❸
RESET key Press this key when releasing
error, travelling the feed mech-
anism to its initial position,
counter resetting, etc.
CLOTH CUT
LENGTH key
This key selects cloth cut length
display.
❹ MODE key This key is used for displaying
the mode screen.
KNIFE GROOVE
WIDTH key
This key is used to select the knife-
groove width correction display.
Every time this key is pressed,
S003 (right) and S004 (left) are
displayed alternately.
❺ PRESSER and
WINDER key
This key lifts or lowers the press-
er. When the presser goes up,
the needle bar travels to the ori-
gin and when it comes down, the
needle bar travels to the right.
This key is pressed when per-
forming bobbin winding.
CLEARANCE
key
This key selects clearance display.
Every time this key is pressed,
S022 (first clearance) and S023
(second clearance) are displayed
alternately.
❻ ITEM SE-
LECT key
This key is used to select the
data No. and other kinds of
data.
THREAD TEN-
SION key
This key is used to select the
thread tension display.
Every time this key is pressed, the
display item is changed over as
described below:
S052 Thread tension at the right
parallel section
S053 Thread tension at the left
parallel section (first cycle of
double stitching)
S054 Thread tension at the right
parallel section (first cycle of
double stitching)
S055 Thread tension at the first
bartacking section
S056 Thread tension at the second
bartacking section
❼ DATA
CHANGE key
This key is used to change the
pattern No. and other kinds of
data.
This key is used to move the
feed forward on a stitch-by-
stitch basis.
PARAMETER
REGISTRATION
key
This is a short cut key that parame-
ter registration is available. Regis-
tration of shortcut to setting display
of an optional pattern, sewing
parameter or adjustment data is
possible. For the setting procedure,
Refer to "V-16. Using parameter
register key" p.46 .
❽ EDIT key This key is used to display the
edit screen, to select the item
or to display the detail screen.
COUNTER key This key selects counter display.
❾
RETURN key This key is used to return the
screen to the previous one.
COPY key Press this key when copying pat-
tern.
SEWING
SPEED key
This key is used to display the
parameter edit items related to
the sewing speed.
SET READY
LED
It lights up under the sewing mode.
NFC mark Bring the tablet or smartphone
close to the NFC mark when
carrying out communication.