– 62 –
This sewing machine is capable of inputting/outputting data by means of an USB thumb drive.
1) Entering the communication mode.
Referring to the mode screen in
edit/check the data other than sewing data"
, select the communication mode.
2) Selecting the type of communication.
Press DATA CHANGE key
❼
to select the
type of communication.
Name of data
Extension
Description of data
Parameter data
LBH00 XXX . EPD
Unique LBH sewing data form such as stitch
shape, cloth trimming length and overedging
width created with the sewing machine.
Vector form data
VD00 XXX .VDT
Data on needle entry points created with
the PM-1. The data form is commonly used
among JUKI sewing machine.
27. Communication
* Refer to the Engineer's Manual for how to set the vector form data.
❼
In the case the vector-format data is taken out from the operation panel and saved in a USB thumb
drive or a tablet, and again returned to the operation panel, the set values of scale, sewing speed,
etc. will be returned to their reference values. It is therefore necessary to check the set values before
starting sewing. In addition, if multiple pieces of vector-format data are used for continuous sewing
or cycle sewing, those data cannot be read with a tablet.
