– 54 –
1) Set the mode to input mode.
Under the input mode where SET READY LED
goes out, change to the memory switch data is
enabled.
If the current mode is the sewing mode, press
READY key
❷
to change over the mode
to the input mode.
2) Call memory switch data edit screen.
When MODE key
❹
is pressed, the
mode screen (operator level) is displayed.
On this screen, select the memory switch data
(level 1).
When MODE key
❹
is held pressed for
three seconds, the mode screen (maintenance
personnel level) is displayed.
On this screen, the memory switch data (level 2)
can be selected.
3) Select memory switch data to change.
Press ITEM SELECT key
❻
and select the data item which you desire to change.
4) Change data.
There are one data item to change the numerical value and the other data item to select the pictograph in
the memory switch data.
No. such as
is attached to the data item to change the numerical value. Set value can be changed
by increasing/decreasing the value with DATA CHANGE key
❼
.
No. such as
is attached to the data item to select the pictograph. Pictograph can be selected with
DATA CHANGE key
❼
.
→
For the details of memory switch data, refer to
"V-22. Memory switch data list" p.55
21. Method of changing memory switch data
❼
❻
❷
❹
