JUKI AMS-210E-1306, Instruction Manual

Page: 2 / 128

i
CONTENTS
!
. MECHANICAL SECTION (WITH REGARD TO THE SEWING MACHINE) 1
1. SPECIFICATIONS 1
2. CONFIGURATION 2
3. INSTALLATION 3
3-1. Installing the electrical box 3
3-2. Installing and connecting the power switch 3
3-3. Installation of the sewing machine head 4
3-4. Installing the drain receiver and the head support rubber 5
3-5. Safety switch 5
3-6. Installing the throat plate auxiliary cover 6
3-7. Installing the panel 7
3-8. Attaching the pedal chain (For S specification only) 7
3-9. Installing the thread stand 7
3-10. Raising the machine head 8
3-11. Connecting the cord 9
3-12. Installing the motor cover 11
3-13. Managing the cord 12
3-14. Connecting the pneumatic components (Pneumatic type only) 12
3-15. Installing the air hose (Pneumatic type only) 13
3-16. Installing the eye protection cover 14
4. PREPARATION OF THE SEWING MACHINE 14
4-1. Lubrication 14
4-2. Attaching the needle 15
4-3. Threading the machine head 15
4-4. Installing and removing the bobbin case 16
4-5. Installing the bobbin 16
4-6. Adjusting the thread tension 17
4-7. Intermediate presser height 18
4-8. Adjusting the thread take-up spring 19
5. OPERATION OF THE SEWING MACHINE 19
5-1. Sewing 19
5-2. Needle thread clamp device 20
@
.OPERATION SECTION (WITH REGARD TO THE PANEL) 22
1. PREFACE 22
2. WHEN USING IP-400 25
2-1. Name of each section of IP-400 25
2-2. Buttons to be used in common 26
2-3. Basic operation of IP-400 27
2-4. LCD display section at the time of sewing shape selection 29
(1) Sewing shape data input screen 29
(2) Sewing screen 31
2-5. Performing sewing shape selection 33
2-6. Changing item data 35
2-7. Checking pattern shape 37
2-8. Performing modification of needle entry point 38
(1) Changing the thread tension value 38