– 99 –
No.
Item
Operation panel key lock mode (CP-20 only)
0 : Normal
1 : X enlarging /
Y enlarging / speed Item skip
Counter motion selection (CP-20 only)
0 : Sewing UP counter
1 : Bobbin thread DOWN counter
Height of eight of presser at the time
of 2 step scrolling
Buzzer sound can be prohibited.
0 : Without buzzer sound
1 : Panel operating sound
2 : Panel operating sound + error
Number of stitches
of thread clamp release is set.
Clamping timing
of thread clamp can be delayed.
Thread clamp control can be prohibited.
0 : Normal
1 : Prohibited
Feed motion timing is selected.
Set the timing in “–” direction when
stitch is not well-tightened.
State of the presser after end of sewing is selected.
0 : Presser goes up after moving at start of
sewing.
1 : Presser goes up immediately afterend of
sewing.
2 : Presser goes up by pedal operation after
moving at start of sewing.
Setting range
---
---
50 to 90
---
1 to 7
– 10 to 0
---
– 8 to 16
---
Edit unit
---
---
1
---
1
1
---
1
---
