JUKI AMS-210E-1306, Instruction Manual

Page: 3 / 128

i
i
(2) Changing the intermediate presser height value 39
2-9. How to use temporary stop 40
(1) To continue performing sewing from some point in sewing 40
(2) To perform re-sewing from the start 41
2-10. When setting of sewing product is difficult because of interruption of needle tip 41
2-11. Winding bobbin thread 42
(1) When performing winding bobbin thread while performing sewing 42
(2) When performing winding bobbin thread only 42
2-12. Using counter 43
(1) Setting procedure of the counter 43
(2) Count-up releasing procedure 45
(3) How to change the counter value during sewing 45
2-13. Performing new register of users’ pattern 46
2-14. Naming users’ pattern 47
2-15. Performing new register of pattern button 48
2-16. LCD display section at the time of pattern button selection 49
(1) Pattern button data input screen 49
(2) Sewing screen 51
2-17. Performing pattern button No. selection 53
(1) Selection from the data input screen 53
(2) Selection by means of the shortcut button 54
2-18. Changing contents of pattern button 55
2-19. Copying pattern button 56
2-20. Changing sewing mode 57
2-21. LCD display section at the time of combination sewing 58
(1) Pattern input screen 58
(2) Sewing screen 60
2-22. Performing combination sewing 62
(1) Selection of combination data 62
(2) How to edit combination data 62
2-23. Changing memory switch data 63
2-24. Using information 64
(1) Observing the maintenance and inspection information 65
(2) Releasing procedure of the warning 66
(3) Observing the production control information 66
(4) Performing setting of the production control information 68
(5) Observing the working measurement information 70
2-25. Using communication function 72
(1) Handling possible data 72
(2) Performing communication by using the smart media 73
(3) Performing communication by using RS-232C 73
(4) Take-in of the data 74
(5) Taking in plural data together 75
2-26. Performing formatting of the smart media 77
3. WHEN USING CP-20 78
3-1. Name of each section of CP-20 78
3-2. Operation of CP-20 (Basic) 79
(1) Item data setting 79
(2) Checking the contour of a sewing pattern 81
(3) Performing modification of the needle entry point 82