– 40 –
When TEMPORARY STOP switch
1
is pressed
during sewing, the sewing machine can be
stopped. At this time, the error screen is displayed
to inform that the stop switch has been pressed.
(1) To continue performing sewing from some point in sewing
1
Release the error.
Press RESET button
A
to release the error and the
sewing screen is displayed.
1
2
Perform thread trimming.
Press THREAD TRIM button
B
to perform thread
trimming.
When PRESSER UP button
G
is pressed, the presser
goes up. Turn OFF the power since the operation afterwards
cannot be performed.
When thread trimming is performed, INTERMEDIATE
PRESSER UP/DOWN button
C
, FEED BACKWARD
button
D
, FEED FORWARD button
E
, and
RETURN TO ORIGIN button
F
are displayed in the
screen.
1. When the presser is raised and the operation is
stopped on the way because of the trouble of
forgetting to enter the bobbin case or the like,
press PRESSER UP button
G
and turn
OFF the power.
2. PRESSER UP button
G
is not displayed
when the presser is of pneumatic type.
3
Adjust the presser to the re-sewing position.
When FEED BACK button
D
is pressed, the presser
returns stitch by stitch and when FEED FORWARD button
E
is pressed, it advances stitch by stitch. Move the presser to the
re-sewing position.
4
Re-start the sewing
When the pedal is depressed, sewing starts again.
2-9. How to use temporary stop
A
B
C
E
F
D
G
