JUKI AMS-210E-1306, Instruction Manual, Page: 4 / 128

(4) When the pattern is changed 84
3-3. Performing copying of pattern 84
3-4. Performing deletion of pattern 85
3-5. Sewing 86
(1) Change to the other sewing pattern 86
3-6. Winding bobin 87
(1) To wind a bobbin while the sewing machine is performing sewing 87
(2) To wind a bobbin independently 87
3-7. Operation of CP-20 (Advanced) 88
(1) Performing sewing using the pattern keys ( , , , and ) 88
(2) Register to the pattern key 88
(3) Sewing operation 90
3-8. Performing sewing using the combination function 91
(1) Register of the combination 91
(2) Sewing operation 92
3-9. When using as "bobbin thread counter" 93
(1) How to use the temporary stop 93
3-10. Start and change of the memory switch 94
3-11. Correspondence table of LED and 7-segment display 95
4. MEMORY SWITCH DATA LIST 98
4-1. Data list 98
4-2. Initial value list 106
5. ERROR CODE LIST 108
#
. MAINTENANCE OF SAWING MACHINE 114
1. MAINTENANCE 114
1-1. Adjusting the height of the needle bar (Changing the length of the needle) 114
1-2. Adjusting the needle-to-shuttle relation 114
1-3. Adjusting the height of the feeding frame 116
1-4. Adjusting the vertical stroke of the intermediate presser 116
1-5. The moving knife and counter knife 117
1-6. Needle thread clamp device 117
1-7. Thread breakage detector plate 117
1-8. Draining waste oil 118
1-9. Amount of oil supplied to the hook 118
1-10. Replacing the fuse 118
1-11. Changing the voltage of 100
,/
200V 119
1-12. Replenishing the designated places with grease 120
1-13. Troubles and corrective measures (Sewing conditions) 122
2. OPTIONAL 124
2-1. Table of Needle hole guide 124
2-2. Silicon oil tank 124
i
ii