– 57 –
3
Select the pattern No. of copy source.
Select the pattern button No. of copy source from the pattern
button list button
B
.
Next, press COPY DESTINATION INPUT button
C
and
the copy destination input screen is displayed.
4
Input the pattern No. of copy destination.
Input the pattern button No. of copy destination with ten keys
D
.
Pattern button No. which is not used yet can be retrieved with
– and + buttons
(
E
and
F
).
In addition, the folder to be stored can be selected with
FOLDER SELECTION button
G
.
5
Start copying.
When ENTER button
H
is pressed, copying starts.
The copied pattern button No. in the selection state returns to
the pattern button copy (copy source selection) screen after
approximately two seconds.
* Combination data can be copied in the same way.
2-20. Changing sewing mode
1
Select the sewing mode.
When
switch is pressed in the state that the pattern has
been registered, SEWING MODE SELECTION button
A
is displayed on the screen. When this button is pressed,
the sewing mode changes alternately the individual sewing
and the combination sewing. (The mode cannot be changed
even when the button is pressed unless the pattern button is
registered.)
* The image of the button of sewing mode selection button
changes according to the sewing mode which is selected at
present.
When individual sewing is selected :
When combination sewing is selected :
D
G
F
E
H
C
B
A
