– 7 –
1
2
4
3
Fix operation panel installing plate
1
to an
optional place on the table with wood screws
2
,
and pass the cable through table hole
4
.
Fix the operation panel on panel installing plate
1
with screws
3
supplied as accessories.
Fix the cable on the bottom surface of the table
with the staples supplied with the machine as
accessories.
2) Installing the CP-20
1
2
3
3-8. Attaching the pedal chain (For S specification only)
3-7. Installing the panel
Fix operation panel installing plate
1
to an
optional place on the table with two wood screws
2
.
2
1) Installing the IP-400
1
1
2
3-9. Installing the thread stand
1) Assemble the thread stand, and put
it in the hole in the top left corner of
the machine table.
2) Tighten locknut
1
to fix the thread
stand.
3) When ceiling wiring is possible,
pass the power cord through spool
rest rod
2
.
Connect the machine
1
and manual pedal
3
with
chain
2
.
When you tilt the sewing machine,
be sure to tilt it after removing
chain
2
from manual pedal
3
.
