– 1 –
1. SPECIFICATIONS
!
. MECHANICAL SECTION (WITH REGARD TO THE SEWING MACHINE)
1 Sewing area
X (lateral) direction
Y (longitudinal) direction
AMS-210E-1306
: 130 mm ×
60 mm
AMS-210E-1510
: 150 mm ×
100 mm
AMS-210E-2206
: 220 mm ×
60 mm
2 Max. sewing speed
2,700 rpm (When sewing pitch is 3 mm or less)
3 Stich length
0.1 to 12.7 mm (Min. resolution : 0.05 mm)
4 Feed motion of feeding frame Intermittent feed (2-shaft drive by stepping motor)
5 Needle bar stroke
41.2 mm
6 Needle
DP x 5, DP x 17
7 Lift of feeding frame
Max. 25mm (Pneumatic type only Max.30mm)
8 Intermediate presser stroke
4 mm (Standard) (0 to 10 mm)
9 Lift of intermediate
presser
20 mm
10 Intermediate presser
DOWN position
variable
Standard 0 to 3.5 mm (Max. 0 to 7.0 mm)
11 Shuttle
Double-capacity semi-rotary hook
12 Lubricating oil
New Defrix Oil No. 2 (Supplied by oiler)
13 Memory of pattern
data
EEP-ROM , Smart media
• EEP-ROM : Max. 200 patterns (Max. 20,000 stitches/pattern)
• Smart media : Max. 999 patterns (Max. 50,000 stitches/pattern)
14 Temporary stop facility
Used to stop machine operation during a stitching cycle.
15 Enlarging / Reducing
facility
Allows a pattern to be enlarged or reduced on the X axis and Y axis independently
when sewing a pattern. Scale : 1% to 400% times (0.1% steps)
16 Enlarging / Reducing
method
Pattern enlargement / reduction can be done by increasing / decreasing either stitch
length or the number of stitches. (Only increase/decrease of stitch length when pattern
button is selected and CP-20 is used)
17 Max. sewing speed
limitation
200 to 2,700 rpm (Scale : 100 rpm steps)
18 Pattern selection
facility
Pattern No. selection method
(EEP-ROM : 1 to 200, Smart media : 1 to 999)
(CP-20 is the scroll type.)
19 Bobbin thread counter
UP/DOWN method (0 to 9,999)
20 Sewing counter
UP/DOWN method (0 to 9,999) (IP-400 only)
21 Memory back-up
In case of a power interruption, the pattern being used will automatically be stored in
memory.
22 2nd origin setting
facility
Using jog keys, a 2nd origin (needle position after a sewing cycle) can be set in
the desired position within the sewing area. The set 2nd origin is also stored in
memory.(IP-400 only)
23 Sewing machine motor 550W servo-motor
24 Dimensions
1,200mm (W) x 710mm (L) x 1,200mm (H) (Excluding thread stand)
25 Mass (gross mass)
Machine head 69kg, control box 16.5kg
26 Power consumption
500 VA
27 Operating temperature
range
5˚C to 35˚C
28 Operating humidity range 35 % to 85 % (No dew condensation)
29 Line voltage
Rated voltage ±10% 50 / 60 Hz
30 Air pressure used
Standard 0.35 to 0.4 MPa (Max. 0.55 MPa)(Pneumatic type only)
31 Air consumption
1.8 dm
3
/ min (ANR) (Pneumatic type only)
32 Needle highest
position stop facility
After the completion of sewing, the needle can be brought up to its highest position.
33 Noise
Workplace-related noise at sowing speed
n = 2,700 min
–1
: L
PA
≦
84dB(A)
Noise mesurement according to DIN 45635-48-B-2-KL2
