JPS JMD-STD-90A, User Manual

Page: 119 / 149

www.jps.com.tw
118

DIx _ Select

020，P2P Cancel & Save remaining distance

DIx _ Select

021，P2P Continue the Saved distance
Length-A
DIx(18)P2P Trigger
DIx(20) P2P Cancel & Save remaining distance
DOx(79) P2P：Ready ( no Cancelled pulse remaining in the buffer )
Length-B
DIx(21) P2P Continue the Saved distance
DOx(60) P2P：Ready
Total = Length-A + Length-B

DIx _ Select

030，P2P JOG Forward

DIx _ Select

031，P2P JOG Reverse
When performing this function, perform P2P forward and reverse JOG 。
【Note】 When both conditions are established at the same time ,
P2P JOG Forward is the main command 。
When DIx (18) triggers established, this feature does not apply 。
This function is activated, must executive under Pr.415: P2P Status = 0 。

DIx _ Select

124，P2P Trigger Control : ON=disable , OFF=enable

DIx _ Select

125，P2P Trigger Control : ON=enable , OFF=disable
When performing this function, the decision DIx (18): P2P trigger is established 。
【Note】 This function is not available while the establishment of two 。