JPS JMD-STD-90A, User Manual

Page: 141 / 149

www.jps.com.tw
140
※ 14.4.6.3 BP2P Mode：Mark Mode Application & Curve Description
14.4.6.3.1 BP2P Mark Adjustment-1
Steady Speed
DIx(037)：Mark Then Move Pos15
RPM
DIx(018)：P2P Trigger
Clear to 0
Pr.428
-Pr.430 -Pr.430
Position=0 Mark Appear
Pr.304
Total Position=Pr.428+Pr.304
DOx(080)：P2P-MARK Window

Pr.304：Position Set15 (POSx SW=1111)

Pr.306：P2P Mark Reference Position

Pr.428：(M) P2P MARK Position(mm)

Pr.430：P2P MARK-Window

DIx(037)，P2P Check Mark then Move POS[15]

DOx(080)，P2P：MARK Window

DOx(081)，P2P：MARK Loss
Target Length
Pr.306
DOx(081)：P2P-MARK Loss
BP2P Mark Adjustment1
Theory：Mark Window
※Definitions & Rules：

Pr.430：P2P Mark Window=(Pr.306：P2P Mark Reference Position)
left and right open±Pr.430mm。

DIx(037)：

Need to appear inside the P2P Mark Window。

Need to appear when speed under steady status。
※ Action Description：

When DIx(018) trigger，current position=0 mm。

When DIx(037) signal acknowledge：

Travel-length position will be record = Pr.428

According to Pr.428 record value，execute Pr.304 setting again。