Drill Chuck, Keyless, Drill Speed (530.731)
Maximum speed: approx. 930 rpm
Maximum torque: approx. 6.0 Nm
Cannulation: Ø 3.2 mm
Accepts round and triangular shafts up to
Ø 7.3 mm
Technical data is subject to tolerances.
Insert instrument
Open the chuck jaws by holding on to the retaining
ring and manually turning the chuck (Fig. 1).
Insert the instrument shaft into the opened chuck.
Close the chuck by holding on to the release ring and
manually turning the chuck in the opposite direction
(Fig. 2).
Ensure the instrument shaft is centered in the chuck.
Remove instrument
Open the chuck jaws by holding on to the retaining
ring and manually turning the chuck. Remove the
instrument.
Figure 1
Figure 2
Battery Power Line II Instructions for Use
DePuy Synthes
25
Summary of Contents for BPL II
Page 2: ......
Page 4: ...2 DePuy Synthes Battery Power Line II Instructions for Use...
Page 75: ......
