Johnson & Johnson BPL II, Instructions For Use Manual

Page: 63 / 76

Battery Reamer/Drill II
Problem Possible causes Solution
Attachments cannot couple to
drive unit Coupling is blocked by residue
Precaution:
Immediately turn
mode switch OFF (Lock position).
Remove solid particles with pick-
ups. Clean and lubricate accord-
ing to care and maintenance
guidelines.
Attachment coupling is damaged Send damaged attachment to
DePuy Synthes Service Center
Difficulty removing attachments
from drive unit Coupling is blocked by residue
Precaution:
Immediately turn
mode switch OFF (Lock position).
Remove solid particles with pick-
ups. Clean and lubricate coupling
sleeve according to care and
maintenance guidelines.
Drive unit coupling sleeve is dam-
aged Send damaged drive unit to
DePuy Synthes Service Center
Bone and drive unit heat up dur-
ing surgery
The cutting tool is blunt Replace the tool
Battery Oscillator II
Problem Possible causes Solution
Saw blade is difficult to couple or
cannot be coupled General wear and tear has affected
the connection geometry of the
saw blade Replace the saw blade
Bone and drive unit heat up dur-
ing surgery The cutting teeth of the saw blade
are blunt Replace the saw blade
Battery Oscillator II vibrates too
intensively Saw blade locking mechanism is
not tight Tighten the locking knob on the
saw blade quick coupling
Battery Reciprocator II
Problem Possible causes Solution
Saw Blade is difficult to couple or
cannot be coupled General wear and tear has affected
the connection geometry of the
saw blade Replace the saw blade
Bone and drive unit heat up dur-
ing surgery The cutting teeth of the saw blade
are blunt Replace the saw blade
Battery Power Line II Instructions for Use
DePuy Synthes
61