Operating Instructions
Battery Reciprocator II (530.715)
To operate the drive unit, turn the mode switch to the
“ON” position.
The single variable-speed trigger allows control of
the reciprocating frequency from 0 to 14’000 oscilla-
tions per minute. When the trigger is released, the
tool stops immediately. Ensure the drive unit is run-
ning prior to contacting the bone. Optimal sawing
performance is achieved by gently moving back and
forth in the plane of the saw blade, allowing the saw
blade to reciprocate freely slightly beyond the bone.
Precaution:
To prevent injuries, the mode switch of the drive unit
should always be in the lock position when inserting
or removing saw blades, or adjusting the sawing
plane.
For further information on the System Specifications
and Duty Cycle and please refer to page 63f.
Locked symbol
Drive units is off for safety
ON
Drive units is of for sawing
Battery Power Line II Instructions for Use
DePuy Synthes
37
Summary of Contents for BPL II
Page 2: ......
Page 4: ...2 DePuy Synthes Battery Power Line II Instructions for Use...
Page 75: ......
