Johnson & Johnson BPL II, Instructions For Use Manual

Page: 8 / 76

Introduction
General Information
6
DePuy Synthes
Battery Power Line II Instructions for Use
Accessories/scope of delivery
The Battery Power Line II consists of three different
handpieces, a battery casing, a battery and a range
of attachments designed for the system.
To charge the batteries only use the corresponding
Synthes Universal Battery Charger II (05.001.204).
To reach the specified performance only Synthes
cutting tools should be used. These are optimized to
meet the specific requirements of the tool.
Non Synthes saw blades can considerably reduce
the lifetime of the system
Special auxiliaries such as cleaning brushes
(516.101) and Synthes Special Oil (519.970) are
available for cleaning and servicing the system.
No oils from other manufacturers may be used. Only
Synthes Special Oil (519.970) must be used to lubri-
cate the power tools and attachments.
Lubricants with other compositions may cause jam-
ming, have a toxic effect or have a negative impact
on the sterilization results. Only lubricate the power
tool, the battery casing and the attachments when
clean.
DePuy Synthes recommends the use of the specifi-
cally designed Synthes Washing Baskets
(68.001.620, 68.001.625) or Synthes Vario Case
(689.202) to sterilize and store the system. Further-
more, the Washing Baskets (68.001.620,
68.001.625) can be used for the automated cleaning
procedure. Further information can be found on page
46ff.
Please refer to the “Ordering Information” section on
page 71ff for an overview of the components of the
system.
Storage and transport
Only use the original packaging for dispatch and
transport as otherwise damage may occur. If this is
not possible, please contact your local DePuy Syn-
thes office.
For storage and transport environmental conditions
please refer to the “Packaging, Sterilization and
Storage” section on page 55ff.
Warranty
The warranty for the tools and accessories does not
cover damage of any kind resulting from wear, im-
proper use, damaged seal, use of non Synthes cut-
ting tools and lubricants or improper storage and
transport.
The manufacturer shall assume no responsibility for
damage resulting from improper operation, neglected
or unauthorized maintenance of the tool.
For further information on the warranty please con-
tact your local DePuy Synthes office.