Electromagnetic Compatibility
Accompanying Documents According to
IEC 60601-1-2, 2007, Clause 6
Battery Power Line II Instructions for Use
DePuy Synthes
67
Table 1: Emissions
Guidance and manufacturer’s declaration – electromagnetic emissions
The Battery Power Line (BPL) or Battery Power Line II (BPL II) System is intended for use in the electromag-
netic environment specified below. The customer or the user of the BPL or BPL II System should assure that it
is used in such an environment.
Emission test
Compliance
Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The BPL or BPL II System uses RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations / flicker
emissions
IEC 61000-3-3
Not applicable
The BPL or BPL II System is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes.
Summary of Contents for BPL II
Page 2: ......
Page 4: ...2 DePuy Synthes Battery Power Line II Instructions for Use...
Page 75: ......
