COMPONENT ACCESS
Jenn-Air Built-in Coffee System
n
4-11
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Removing the Main Power Board
1.
Remove back panel (page 4-10) to access main power
board (see Figure 1).
2.
Disconnect all harnesses. If necessary, label terminals and
connectors for ease of reinstallation.
3.
To remove main board, remove the five (5) screws
securing PCB to chassis (see Figure 2).
Figure 1
Figure 2