COMPONENT ACCESS
Jenn-Air Built-in Coffee System
n
4-9
Removing the Fan Panel
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
1.
Remove two (2) screws from the corner on the right side
(see Figure 1).
Figure 1
2.
Remove one (1) screw from the corner on the left side
(see Figure 2).
Figure 2
3.
The fan cover unclips and lifts up (see Figures 3 & 4). The
cooling fan is fitted inside the cover.
Figure 3
Figure 4
4.
Disconnect the fan harness from connector “J1” on the LED/
Fan PCB (see Figure 5).
Figure 5
5.
Remove fan panel from coffee system.
