4-20
n
Jenn-Air Built-in Coffee System
COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Removing the Display Board & 2-Way Valve
Remove Display PCB
1.
First, perform preparation procedure on page 4-8, “Before
Disassembling the Coffee System” prior to performing the
following steps.
2.
Next, perform the procedures to “Removing the Fan
Panel” on page 4-9.
3.
Then, perform the procedures to “Removing the Back
Panel” on page 4-10.
Figure 1
4.
Remove 14 screws, seven (7) from each side (see Figures 2
and 3).
Figure 2
Figure 3
