COMPONENT ACCESS
Jenn-Air Built-in Coffee System
n
4-23
Removing the Display Board & 2-Way Valve
12.
Disconnect the harness from the Display PCB. Unscrew
two (2) screws to remove the Display PCB from front panel
(see Figure 13).
Figure 13
Remove 2-Way Valve
1.
Locate and remove the two (2) screws illustrated in Figure 1.
Figure 1
2.
Remove the metal guide as illustrated in Figure 2.
Figure 2
Refer to Figure 3 when performing the following 3 steps.
3.
Disconnect the wiring from the solenoid valve.
4.
Disconnect the two (2) hoses from the solenoid valve.
5.
Unscrew the two (2) screws to remove the solenoid valve.
Figure 3
