4-24
n
Jenn-Air Built-in Coffee System
COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Removing the Grinder Assembly
1.
With a small screwdriver, remove the cap from the
Grinder knob, then remove the screw (see Figure 1).
Figure 1
2.
Remove the finger guard. Then remove the coffee bean
storage area from the grinder by removing the screws
illustrated in Figure 2.
Figure 2
3.
To remove the grinder assembly, remove the three (3)
screws shown in Figure 3.
Figure 3
4.
Then, disconnect the motor terminals from the control
board terminals “F2” and “F7.”
L
L
L
L
N
F5
F7
F8
F9
J5
J2
J7
J8
J13
J6
J12
J4
J1
F4 F3 F2 F1
Figure 4 - Grinder Motor Connections on Main Board
Grinder
Motor
Main
Board
F7
F2
