4-12
n
Jenn-Air Built-in Coffee System
COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Removing the Flow Meter
1.
Remove back panel (page 4-10) to access flow meter
assembly (see Figure 1).
Figure 1
2
. Unscrew the screw to remove the electrical cable bracket
(see Figure 2). Set aside to access the flow meter.
Figure 2
3.
Lift off the rubber cap to access the flow meter connector.
Remove harness from flow meter (see Figure 3).
4.
Remove the two (2) water tubes from the flow meter (see
Figure 3).
Figure 3
Rubber Cap
