4-18
n
Jenn-Air Built-in Coffee System
COMPONENT ACCESS
Removing the Coffee Heater
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Remove Upper Panel
1.
Remove back panel (page 4-10) to access the Coffee
Heater (see Figure 1).
2.
Remove two (2) screws at the rear of the coffee system as
shown in Figure 1.
Figure 1
3.
Remove two (2) screws, one on each side as shown in
Figures 2 and 3.
Figure 2
Figure 3
4.
Remove upper panel (see Figure 4).
Figure 4
