COMPONENT ACCESS
Jenn-Air Built-in Coffee System
n
4-21
Removing the Display Board & 2-Way Valve
5.
Remove four (4) screws from the bottom of the coffee
system (see Figure 4).
Figure 4
6.
Remove two (2) screws from the left side of coffee system
(see Figure 5).
Figure 5
7.
Remove two (2) screws from the right side of coffee
system (see Figure 6).
Figure 6
8.
From the front of the coffee system, remove the three
(3) screws located above the service door, underneath
the control/display panel. Refer to Figure 7 for screw
locations.
Figure 7
