JCM GAMMA VERSUS M20, Manual

Page: 64 / 111

GAMMA VERSUS MANUAL
64
COD. 1257066 Gamma VERSUS Manual v1.13
7.27 Error and warning display function
Model All
Associated
parameters
ID Description Type
P24 Error info displayed ON/OFF
P80 Panel last error NUMERIC
P9A Panel last problem NUMERIC
P9B Panel last warning NUMERIC
Description The error and warning display function allows expanding the displayed error
information.
Configuration To enable the error and warning display function it is needed to set to ON the P24
configuration parameter by means a VERSUS-PROG programming tool.
Last main active error can be checked by means of the P80 status configuration
parameter. Last normal active error or problem can be checked by means of the P9A
status configuration parameter. Finally, last active warning can be checked by means of
the
P9B status configuration parameter.
Operating
By default control panel reports a limited list of errors. These errors are those that are
critical or those that inform about a security malfunction.
If user wants to expand the error information in order to see normal errors or warnings,
error and warning function has to be enabled.
If no VERSUS-PROG programming tool is used the only way to know that there is an
active error or warning is taking a look to the control panel STOP/ERROR red LED. If
the LED is ON it means that there is an active error or warning. If error and warning
display function is disabled only critical errors will be informed.
To know the active error or warning value it is necessary to use a VERSUS-PROG
programming tool.
Notes Active errors and warnings keep active until the error is solved and an opening or
closing maneuver is started. Afterwards if everything is ok the error is deactivated