JCM GAMMA VERSUS M20, Manual

Page: 84 / 111

GAMMA VERSUS MANUAL
84
COD. 1257066 Gamma VERSUS Manual v1.13
4.1.5 RESET TO DEFAULT VALUES
It allows configurating the control panel with the default values.
4.1.6 PARAMETRES LEVEL
The parameters are organized in two different levels, basic and advanced.
Allows selecting what parameters will be displayed in the programmer
4.2 OTHER PANELS CONFIG
It allows setting the control panels configurable with PROG-MAN.
4.3 PROGRAMMER CONFIG
It allows setting the programming software.
4.3.1 LANGUAGE
This allows for the required language to be selected . There are 3 languages vailable depending on the version
4.3.2 HOT KEYS
It allows assigning different functions to the hot keys. Select the key you want to configure using the navigation
keys and the slider to navigate and assign different options to the hot keys.
4.3.2 APPEARANCE
Allows adjusting the parameters and/or deactivate some of the programmer appearance parameters: LCD contrast,
vibration, sound, slider active, slider sensitivity and battery type.
4.3.3 BATTERY TYPE
Allows choosing if the programmer batteries are re-chargeable or not.
When
a charge of the rechargeable batteries is required, the programmer recharges the
batteries slowly. If you want to load them quickly, remove the batteries and recharge them with an external charger.
Attention: Do not attempt to charge non-rechargeable batteries.
4.3.4 MODO SERVICIO
Transfers the programmer control to the PC for: updating firmware, change languages and manage configurations
form the PC
USE OF THE PROGRAMMER
The programmer is designed for the management of installations as per the general description. Not guaranteed for
other uses.
The manufacturer reserves the right to modify equipment specifications without prior notice.
JCM TECHNOLOGIES, S.A. declares here with that the product VERSUS-PROG complies with the relevant
fundamental requirements as per Article 3 of the R&TTE Directive 1999/5/EG, insofar as the product is used
correctly.
CE DECLARATION OF CONFORMITY
See website www.jcm-tech.com