JCM GAMMA VERSUS M20, Manual

Page: 87 / 111

GAMMA VERSUS MANUAL
87
COD. 1257066 Gamma VERSUS Manual v1.13
3. PROGRAMMING MODE
4. PARAMETER CONFIGURATION MODE
Being in “Door state indication” mode, press the + or – button during 2 seconds to enter in “Parameters
configuration” mode. To exit this mode wait 10 seconds without pressing any button.
Notes:
The values depend on the control panel and only will be taken into account when the door is opened, stopped
or closed.
The card keeps the last values programmed even when it is disconnected form the control panel.
The numeric parameters have a scale factor according to the maximum number that they can adopt. See the
section 5 of the GAMMA VERSUS MANUAL for finding this scale factor (named as DPLAY factor).
Being in “Door state indication” mode,
press the MODE button during 5
seconds. PR will appear on the
display indicating that the control
panel has entered programming
mode. Once finished the
programming of the maneuver, the
control panel will exit this mode
automatically after 30 seconds.
START PARAMETER
CONFIGURATION PRESS + / - TO SEARCH
PARAMETER PRESS MODE TO EDIT
PARAMETER
VISUALIZE ACTUAL
VALUE
PRESS + / - TO CHANGE
VALUE
PRESS MODE TO SAVE
NEW VALUE
*PASSW
ORD
PA APPEARS ON THE
SCREEN
*PASSW
ORD