JCM GAMMA VERSUS M20, Manual

Page: 41 / 111

GAMMA VERSUS MANUAL
41
COD. 1257066 Gamma VERSUS Manual v1.13
7.11 Radiosens function
Model
All
Associated
parameters
ID Description Type
P29 RSENS mode ON/OFF
P2A RSENS detected ON/OFF
P92 RSENS dynamic radio ON/OFF
P53 RSENS inhibition margin NUMERIC
Associated
errors
ID Description Type
Er19 Test closing error Error
Er22 RSENS not found Error
Er23 RSENS not programmed Error
Er33 RSENS synch. error Error
Er36 RSENS radio error Error
Wr18 RSENS activation Warning
Description The Radiosens function allows using the Radiosens security system on the VERSUS
control panels.
Configuration System set-up: In order to use Radiosens system on VERSUS control panels an
RSEC/R receiver must be connected to the control panel on the EXPANSION connector.
Moreover, before proceeding with the control panel programming process it is needed to
program the RSENS transmitter to the RSEC/R receiver (see RSENS transmitter and
RSEC/R receiver user instructions to learn how to perform this programming process).
Parameters: To enable the Radiosens function it is needed to set to ON the P29
configuration parameter by means of a VERSUS-PROG programming tool.
The parameter P2A is a status configuration parameter and it is set to ON when during
the programming maneuver sequence a Radiosens system is detected (RSEC/R
receiver is detected and Radiosens transmitter has been programmed on the receiver).