20 - 5
Section G
9803/3280
Section G
20 - 5
Issue 1
Service Procedures
Parking Brake - Switch Adjustment
1
Select the starter key switch to the ON position, do not
start the engine.
2
Select either forward or reverse.
3
Raise the handbrake to the ON position.
4
Adjust locknuts
B
and use feeler gauges to set the
proximity switch
A
so that there is clearance of 2mm
MIN - 3mm MAX between the end of the switch and the
handbrake lever. The light emitting diode (L.E.D.) on the
switch should be illuminated and the audible alarm
should sound.
5
Secure the switch in position by tightening locknuts
B
.
6
Release the parking brake and the audible alarm should
cease.
For adjustment of the Parking Brake, refer to
Parking Brake
- Adjustment
.
Torque Settings
Item
Nm
kgf m
lbf ft
B
29
2.95
21
A396440
B
B
A