74
= Key1
= Key 2
= Key 3
= Max. value or consumption = Min. value or supply
Select analogue
output with
key 2.
Confirm selection
with
key 1.
The text „AnLo“ flas-
hes and the symbol
EDIT
appears.
Analogue output 01
Example: Measured
values
Select measured va-
lues as source with
key 2.
V
V
V
L3
L1
L2
CONF
EDIT
V
L1
EDIT
Select a measured
value from the indica-
tion using
key 1.
The symbol
EDIT
ap-
pears.
V
L1
EDIT
CONF
Confirm selection
with
key 2.
The first number of
the scale start value
flashes.
Select digit with
key 1
and change with
key
3.
Voltage in L1
Scale start
value
Changeover between the source with
key 3:
- oFF (no source),
- EMAX analogue outputs and
- MODBUS
or select measured values with
key 2.
EDIT
CONF
EDIT
CONF
Example: EMAX
analogue output
Select „EMAX
analogue output as
source with
key 3.
Confirm selection
with
key 2.
The programmed
EMAX analogue
output appears.
Select other EMAX
analogue outputs
with
key 2 and key 3.
Example: MODBUS
Select MODBUS as
source with
key 3.
Confirm selection
with
key 2.
Programming
We are in the indication „analogue output (source)“
with the respective output number. Here, for
example analogue output
01
. No source
oFF
has
been assigned.
EDIT
CONF
The first measured
value indication ap-
pears.
The text „
AnLo
“ and
the symbol
EDIT
disappear.
Select measured
value indication with
key 3.
EMAX analogue output
Only if an EMAX analogue output is programmed, it
appears as a source. If an EMAX analogue output is
programmed, it is assigned to the analogue output
with the same number automatically. An EMAX
analogue output cannot be assigned to an analogue
output at will.
MODBUS
Scale end
value
Measured value
