22
= Key1
= Key 2
= Key 3
= Max. value or consumption = Min. value or supply
Usage and display
After net return, the UMG 505 shows always the first
programmed measured value indication. The use of
the UMG 505 is carried out via the three keys in the
front.
=
Key 1
=
Key 2
=
Key 3
In the various
indications, the keys
have different mea-
nings.
If you are in the measured value indication, you can
change over to the below mentioned indication by
using key 1.
the measured value indication,
the
SELECT
mode,
the configuration menu
CONF
and
the programming menu
PROG
SELECT
PRG
CONF
Measured
values
Key 1
Key 2 Key 3
In configuration menu
CONF
and in programing
menu
PRG,
the settings can be changed in edit
mode
EDIT
.
In edit mode
EDIT
the keys have the following
meaning:
Key 1 Select digit/number and leave edit mode.
Key 3 Change numbers.
Key 2 Multiplication of a number with factor 10
Pressing
key 1
for about 2 seconds, you return to
the first measured value window of the measured
value indication.
Pressing
key 2
or
key 3
for about
2 seconds
you
return to the previous measured value window.
Press Key 1 for 2 seconds.
Diagr. Menu overview
PRG
PRG
SELECT
PRG
Select averaging
times,
Read storage duration
of the ring buffer...
Voltage transformer,
Aron circuit,
Data logging,
Serial interfaces,
Device addresses,
....
CONF
CONF
A
A
SELECT
CT
CONF
A
A
CT
SELECT
Measured values
SELECT
Show additional
information
SELECT
Measured values
Select phase
Measured values
Measured values
Measured values
