39
= Key1
= Key 2
= Key 3
= Max. value or consumption = Min. value or supply
Configuration
In configuration menu
CONF
the required settings
are noted for operating the UMG505 (see also
"Table of configuration data"). When the device is
delivered, these settings are not protected and can
be changed. An unintended change of the settings
can be avoided using a password.
The following settings can be read out and changed:
Confirm selection of
the menu
CONF
with
key 2.
The text
SELECT
disappears.
Now you are in
menu
CONF,
and
the current
transformer ratio is
indicated.
V
V
V
L3
L1
L2
SELECT
Press
key 1.
The text
SELECT
appears in the indi-
cation and flashes.
Press
key 1 again.
Now you are in menu
CONF
.
A
A
SELECT
CT
CONF
A
A
CT
CONF
To reach menu
CONF
from a measured value indi-
cation, please proceed as follows:
Current transformer
Voltage transformer
Aron circuit
Data logging
Serial interfaces
RS485 interface (Option)
RS232 interface (Option)
LON (Option)
Device address
Measured value rotation
Event memory
Net frequency
Switching outputs 1 to 5
Switching clock
Switch-on time
Switch-off time
Channels
EMAX target value
(Option)
EMAX digital outputs
(Option)
,
Power
min. connection time
EMAX digital outputs
(Option)
,
min. disconnection time
max. disconnection time
EMAX analogue outputs
(Option)
max. power of consumer
min. power of consumer
EMAX analogue outputs
(Option)
max. disconnection power
or
min. connection time of the Generator
Time between minP und maxP
Digital inputs
Pulse valence
Digital outputs
Pulse width
Analogue outputs, source and scale
Analogue outputs, scale range 0/4mA
LCD contrast
Clock,
summer/winterzeit
Password
Serial number
Software Release
