55
= Key1
= Key 2
= Key 3
= Max. value or consumption = Min. value or supply
Switching clock
The switching clock of the UMG505 has 100
switching clock channels. Each switching clock
channel describes a certain period. The period is
described by a switch-on time and switch-off time.
The switch-on and -off time is determined by the
day, hour and minute.
Each switching clock channel can control a
switching clock output, and select an Emax target
value and an energy meter.
In the programming of the digital outputs, a „Digital
Output“ can be assigned to the switching clock
outputs.
Setting range:
Switching clock channels
00 - 99
Switching clock outputs
0
1)
- 5
EMAX target number
0
1)
- 5
Energy meter
see table, TX0
1)
1)
No assignment
Energy meter
Changeable
Real energy
without rev. run. stop
T50 T51 T52 T53 T54
Consumption (EMAX)
T00 T01 T02 T03 T04
Supply
T30 T31 T32 T33 T34
Reactive energy
without rev. run. stop
T40 T41 T42 T43 T44
inductive
T10 T11 T12 T13 T14
capacitive
T20 T21 T22 T23 T24
Diagr. Energy meters of UMG505.
Diagr. Principle diagram of the switching clock
D.H
M.S
CONF
D.H
M.S
CONF
Switch-on time
Switch-off time
CONF
Output channel
UMG505
Switching
clock
Switching
clock channel
00
Switch-off time
First week day
Last week day
Minute, hour
Switch-on time
First week day
Last week day
Minute, hour
Switch-off time
First week day
Last week day
Minute, hour
Switch-on time
First week day
Last week day
Minute, hour
Digital
Output
Digital Output
1 - 5
Digital
Output
Digital Output
1 - 5
UMG505
Digital Outputs
Switching clock output
0 - 5
EMAX target value
0 - 5
Change energy meter
Output channel
Switching clock output
0 - 5
EMAX target value
0 - 5
Change energy meter
Switching clock
channel 99
