23
= Key1
= Key 2
= Key 3
= Max. value or consumption = Min. value or supply
SELECT Mode
For various measured values, it is possible to call
up additional information directly in the measured
value indications. For this purpose, you change into
the
SELECT Mode
in the corresponding measured
value indication.
Now the following additional indication for the
measured values can be called up:
- Mean values and their
averaging time
.
- Minimum and maximum values with
date and
time
.
-
Time of deletion and running time
of the energy
measurement.
- The
energy meters
of the digital inputs.
Programming menu PRG
In programming menu PRG the minimum and maxi-
mum values and energy can be deleted.
A
A
SELECT
CT
CONF
Configuration menu CONF
In configuration menu
CONF
the settings, which are
necessary for the operation of the UMG 505, are
deposited. Besides others, it is the setting of the
current transformer, device address and program-
ming of the inputs and outputs.
In delivery condition, these settings are not
protected and can be changed. Unintentional
change of the settings can be avoided by setting a
password.
SELECT
PRG
Measured value indications
After a net return the device always starts with the
first programmed measured value indication. In the
indication of the UMG 505 up to three measured
values can be indicated simultaneously. With the
keys 2 and 3 one can scroll through those measu-
red value indications. In order to keep the selection
of measured values clear, only a part of the
available measured values are programmed, when
the device is delivered.
If other measured values are desired for the display
of UMG 505, They can be selected via the program-
ming and evaluation software
PSW505
, which
belongs to the contents of delivery, and a PC, and
transmitted to PC via the serial interface of the UMG
505.
Example:
Current transformer
setting, primary
5000A and seconda-
ry 5A.
Example:
Delete minimum and
maximum values.
Example:
Voltage L1-N, L2-N,
L3-N.
V
V
V
L3
L1
L2
